#ARDEX SKIM COAT FREE#
ARDEX FEATHER FINISH is not recommended over adhesive residues in commercial situations.nMIXING/INSTALLATION ARDEX FEATHER FINISH is mixed with clean water (2 parts by volume of powder to 1 part by volume of water) to achieve an easily trowelled, non-flowing slump free consistency.
#ARDEX SKIM COAT INSTALL#
The residues must not be affected by either the initial wetting from the applied mortar or the adhesive used to install the new floorcovering. Ardex Feather Finish is a repair compound and is one of the sub-floor preparation products.nThis floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.nArdex Feather Finish self levelling screed is suitable for use over most substrates and adhesive residues.nDESCRIPTION ARDEX FEATHER FINISH drys rapidly and provides a high bond to concrete, plywood, cement/sand screeds, existing sub-floor smoothing compounds and even existing ceramic tiles without the use of primers.nUse ARDEX FEATHER FINISH for patching, filling and feather finishing, daywork joints, ridges, gouges, depressions, uneven trowel marks, etc., in the sub-floor, as well as smoothing joints between staggered plywood sheets.nSUB-FLOOR PREPARATION ARDEX FEATHER FINISH is designed for use in commercial and domestic locations where the installation involves the use of resilient sheet or floorcoverings such as vinyl sheet or tiles, carpet etc.nThe cement/sand screed, plywood or ceramic tiled sub-floors must be dry, sound and clean, free of dust, grease and other barriers that might impair adhesion to the base.nIn domestic applications only, ARDEX FEATHER FINISH may be installed over existing adhesive residues which are thin, sound and well bonded.
0 kommentar(er)
